Decibel Meter (Sound Level Meter)
Get the appMeasure how loud it is with your phone or laptop microphone: live dB(A), dB(C) or dB(Z), average (Leq), max, L10/L90, chart, spectrum, hearing-safe time, room check and A/B compare. Free, nothing recorded.
Tool inputs stay in your browser · optional AI search sends your query
Loading tool…
Get the ToolsKo Decibel Meter app
The same tool in its own small app. Free, no sign-up.
Good to know: The meter listens through your microphone and works out the sound level many times a second on your own device, with the same A and C weighting filters and Fast/Slow responses that sound level meters use. Nothing is recorded or uploaded. Phone and laptop microphones are not measuring instruments: without calibration a reading can be several dB off, so compare readings with each other, or calibrate against a real meter. Not for legal, workplace-compliance or medical measurements.
How to use it (step by step)
- 1Press Start decibel meter and allow the microphone. Keep the phone still, microphone uncovered, where you want the reading.
- 2Read the live level. dB(A) is how the ear hears and is used by most noise rules; switch to dB(C) for bass or music, Fast for quick sounds, Slow for steady noise.
- 3Let it run for a minute or more for a fair average (Leq), the loudest moment (Max) and the background (L90). Press Mark this moment when something loud happens.
- 4Use the tabs below: Over time (chart), Spectrum, Compare A/B, Hearing safety, Room check (WHO guidance) and Calibrate. Download CSV to keep the readings.
Words to know
- Decibel (dB)
- The unit of loudness. It is a log scale: +10 dB is ten times the sound energy and sounds about twice as loud; +3 dB is double the energy.
- dB(A) / dB(C) / dB(Z)
- Weightings. A follows the ear (quiet bass and very high sounds count less) and is used for noise rules; C keeps most of the bass; Z changes nothing.
- Fast / Slow
- How quickly the reading follows changes: Fast reacts in 1/8 second, Slow averages over about 1 second.
- Leq
- Equivalent continuous level: the steady level with the same total sound energy as the changing sound you measured. The fair "average" of noise.
- L10 / L90
- L10 is the level exceeded 10% of the time (the loud moments); L90 is exceeded 90% of the time (the background you hear in the quiet gaps).
- LCpeak
- The highest instant peak, C-weighted. Short bangs like a slammed door or a hammer show up here more than in the Fast level.
- Noise dose
- How much of a safe daily amount of noise you have used. NIOSH: 85 dB(A) for 8 hours, half the time for every 3 dB more.
- Calibration offset
- The number added to the microphone's digital level to get dB. Matching a real meter once sets it for your microphone.
Sources & methods
- NIOSH: Criteria for a Recommended Standard, Occupational Noise Exposure (85 dBA, 3 dB exchange rate) ↗
- OSHA 29 CFR 1910.95: Occupational noise exposure (90 dBA, 5 dB exchange rate) ↗
- WHO: Guidelines for Community Noise (1999), indoor values for bedrooms, dwellings and schools ↗
- A-weighting and C-weighting curves (IEC 61672-1 formulas) ↗
- CDC: What noises cause hearing loss (typical levels) ↗
References checked November 18, 2026. Read each tool’s scope and assumptions before relying on its result.
Spotted a wrong result or an outdated rule? Report a mistake · How we check our tools · Get new tools by email